PMV 50 moisture analyzer is an advanced solution for measurement of moisture content of samples containing significant amount of moisture (8-100%). The drying process is carried out by means of microwaves which enable to evenly heat the whole sample's volume. The PMV 50, when compared to standard moisture analyzers, significantly shortens the drying time.
The PMV 50 microwave
moisture analyzer
can be successfully used wherever materials containing large amounts of water are dried, for example: dairy products, fish, meat, fruit products, syrups, creams, liquid resin.
The sample is placed in the drying chamber on a glass fibre filter. At the bottom of the chamber there is one end of the waveguide from where the microwaves are emitted. Upon process start, microwaves are equally distributed on the filter's surface and dry the sample. The moisture content is determined on the basis of the
mass
loss obtained during drying.
A respective drying program is selected depending on sample
mass
and its chemical composition. The average duration of this process depends on the type and mass of used substance, and takes 1 to 10 minutes. In contrast, drying using the traditional halogen
moisture analyzer
takes 5 to 40 minutes.
The PMV 50 microwave moisture analyzer is equipped with a temperature sensor and enables to monitor device power in order to prevent exceeding the boiling point during the process. A preset microwave power is displayed on the
indicator
throughout the drying procedure.
Features:
- Intended for drying of samples containing significant amount of moisture (8-100%)
- Ultra-short drying time when compared to traditional moisture analyzers and standard drying methods
- Microwave-based solution
- Uniform heating of entire sample's surface
- Complex database of drying programs
- Finish mode: manual, automatic, time-defined, user-defined
- Advanced reports, time and statistical graphs
- Easy operation due to a touch screen
The PMV 50 moisture analyzer is based on an advanced-class Y series system intended for laboratory balances. Expanded 32 GB memory enables saving and storing sophisticated reports and time and statistical graphs. Wireless communication improves ergonomics and operation safety. Wi-Fi® enables sending data between the moisture analyzer and a mobile device. Large 5.7’’ touch screen guarantees comfort of operation. Proximity sensors ensure touch-free access to user-specified operations.
For each purchase of the PMV 50 moisture analyzer the customer is supplied with:
- 60 glass fibre filters of ø 90 mm,
- a sample of sodium chloride 10% ±0,5% to determine correctness of the operation at the workstation,
- a service concerning determination of drying parameters for five customer-selected samples carried out by RADWAG employee.
| Maximum capacity [Max] |
50 |
| |
g |
| Readability [d] |
00.01 |
| |
mg |
| Tare range |
-50 |
| |
g |
| Adjustment |
external |
| |
|
| Display |
5.7” resistive colour touchscreen |
| |
|
| Communication interface |
RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi® |
| |
|
| Power supply |
100 ÷ 240 V AC 50 / 60 Hz |
| |
|
| Operating temperature |
0,25 |
| |
°C |
| Maximum sample weight |
50 |
| |
g |
| Heating module |
microvawe radiation emiter |
| |
|
| Heating module power |
800 W |
| |
|
| Moisture content readability |
0.0001% |
| |
|
| Finish mode |
4 modes (automatic, manual, time-defined, user-defined) |
| |
|
| Weighing pan material |
glass fibre filter ø 90 mm |
| |
|
| Wi-Fi® is a registered trademark of Wi-Fi Alliance®. |
